Duplex Steel S32205 Sheets & Plates Manufacturer, Supplier & Exporter in India
Duplex Steel S32205 Sheets & Plates supplied by Astromet Steel & Engineering are high-performance stainless steels combining an approximately equal balance of austenitic and ferritic microstructures. This dual-phase structure delivers superior strength, excellent corrosion resistance, and enhanced durability compared to conventional austenitic grades.
Duplex Steel S32205 Sheets & Plates offers outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking, particularly in chloride-rich and marine environments. Its high chromium, molybdenum, and nitrogen content significantly improve corrosion resistance while maintaining excellent mechanical properties.
These sheets and plates provide nearly twice the yield strength of standard stainless steels such as 304 and 316, allowing for thinner sections and reduced overall weight without compromising performance. They also maintain good toughness at both ambient and moderately elevated temperatures.
Duplex Steel S32205 Sheets & Plates exhibits excellent weldability when proper procedures are followed, with minimal risk of intermetallic phase formation. Its metallurgical stability ensures consistent performance in demanding service conditions.
Manufactured in compliance with ASTM A240 / UNS S32205 standards, these sheets and plates undergo strict quality control to ensure dimensional accuracy, chemical consistency, and mechanical reliability.
Due to its balanced performance and cost efficiency, Duplex Steel S32205 Sheets & Plates is widely preferred for structural and corrosion-critical industrial applications.
Duplex Steel S32205 Sheets & Plates Specifications
| S32205 Sheets & Plates Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| S32205 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Duplex Steel S32205 Sheets & Plates Size Range | Cold rolled ASME SA240 Grade S32205 Duplex Steel Sheet 0.5-6.4 mm Hot rolled ASME SA240 Grade S32205 Duplex Steel Sheet 3.0–10.0 mm |
| S32205 Duplex Steel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Duplex Steel S32205 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Duplex Steel S32205 Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Duplex Steel S32205 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Duplex Steel S32205 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SA240 S32205 Duplex Steel Strips EN 10088 SA -240-S32205 Strips |
| Finish of Duplex Steel S32205 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Duplex Steel S32205 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Duplex Steel S32205 Sheets & Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 | 1.4462 | S32205 |
Duplex Steel S32205 Sheets & Plates Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Duplex Steel S32205 Sheets & Plates Mechanical Properties
| Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| S32205 | 7.805 | 0.285 | 1420 – 1465 | 2588 – 2669 |
Why Choose Astromet Steel & Engineering?
Astromet Steel & Engineering supplies Duplex Steel S32205 Sheets & Plates with complete material traceability, test certifications, custom sizing options, and export-standard packaging to meet global project requirements.
Duplex Steel S32205 Sheets & Plates Usage & Applications
Duplex Steel S32205 Sheets & Plates are extensively used in oil & gas pipelines, offshore platforms, chemical processing equipment, heat exchangers, pressure vessels, desalination plants, and marine structures.