Monel K500 Sheets & Plates Manufacturer, Supplier & Exporter in India
Monel K500 Sheets & Plates supplied by Astromet Steel & Engineering are precipitation-hardened nickel-copper alloys that combine the corrosion resistance of Monel K400 with significantly higher strength and hardness. This makes them ideal for demanding mechanical and corrosive environments.
Monel K500 Sheets & Plates offers excellent resistance to seawater corrosion, sour gas environments, and aggressive chemical exposure. Its enhanced mechanical properties allow it to perform reliably under high loads and pressure conditions.
These sheets and plates exhibit superior fatigue strength and wear resistance, making them suitable for dynamic and high-stress applications. They also maintain excellent toughness over a wide temperature range.
Monel K500 Sheets & Plates provides good weldability and fabrication characteristics when appropriate heat treatment procedures are followed. Its non-magnetic nature and dimensional stability enhance its suitability for precision components.
Manufactured in accordance with ASTM B865 / UNS N05500 specifications, Monel K500 sheets & plates supplied by Astromet Steel & Engineering meet strict international quality and performance requirements.
Due to its combination of high strength and corrosion resistance, Monel K500 Sheets & Plates is widely used in critical marine, aerospace, and industrial applications.
Monel K500 Sheets & Plates Specifications
| K500 Sheets & Plates Specifications | ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| K500 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Monel K500 Sheets & Plates Size Range | Cold rolled ASME SB127 Grade K500 Monel Sheet 0.5-6.4 mm Hot rolled ASME SB127 Grade K500 Monel Sheet 3.0–10.0 mm |
| K500 Monel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Monel K500 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Monel K500 Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Monel K500 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Monel K500 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB127 K500 Monel Strips EN 10088 SA -240-K500 Strips |
| Finish of Monel K500 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Monel K500 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Monel K500 Sheets & Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Monel K500 Sheets & Plates Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Monel K500 Sheets & Plates Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Why Choose Astromet Steel & Engineering?
Astromet Steel & Engineering ensures reliable supply of Monel K500 Sheets & Plates with full material traceability, competitive pricing, and timely global delivery.
Monel K500 Sheets & Plates Usage & Applications
Monel K500 Sheets & Plates are used in marine shafts, pump components, offshore oil & gas equipment, aerospace fasteners, chemical processing systems, and high-strength marine hardware.