Inconel 750 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer & Exporter in India - AstroMet Steel & Eng.
AstroMet Steel & Eng is a leading Inconel 750 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer in India. We are a experienced Manufacturer of Inconel 750 Sheets with the most competitive prices and fast delivery facilities everywhere in India. Inconel 750 Material is an often used in the Aerospace Industry. It is easily machined in particular tempers and is one of the strongest available aluminium alloys, having high hardness. However, it is not easy to weld due to cracking.
Inconel 750 Sheets, Plates, and Coils Manufacturer & Exporter in India
AstroMet Steel & Eng is one of the largest Inconel 750 Sheet Exporters and Suppliers in India. At temperatures up to 1300oF (700oC), Inconel 750 Plate offers high tensile and creep-rupture capabilities in addition to good resistance to corrosion and oxidation. Alloy X750 Plate is also known as Worst-off Number 2.4669 and UNS N07750. We are renowned in Mumbai and the surrounding areas as suppliers of Inconel X750 Sheets. These Inconel 750 Sheets are offered by our firm at the most affordable factory rates and comply with national and international quality standards including ASTM, ASME, UNS, EN, and IS. Send us your specifications for a free quote.
AstroMet Steel & Eng is a top-tier Supplier of Inconel 750 Sheets. Our business is renowned for its superb customer service and premium products. We have a large selection of wire sizes and shapes, so you can be sure to get the ideal item for your application. These Inconel X750 Sheets are Manufacture by AstroMet Steel & Engineering with additional features and advantages to meet industry needs and demands. High mechanical strength, ductility, and corrosion resistance are a few of the qualities that Supply resistance to both reducing and oxidizing conditions.
Inconel 750 Sheets and Plates Specification
Specifications: |
ASTM B670 / ASME SB670
|
Standard: |
ASTM, ASME, and API
|
Size: |
1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
|
Thickness: |
1.0mm – 200mm
|
Range: |
5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 2500 mm Length.
|
Production: |
Hot-Rolled (HR) / Cold-Rolled (CR)
|
Form: |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc
|
Grade: |
X-750 UNS (N07750), DIN (2.4669)
|
Inconel 750 Sheets, Plates, and Coils Equivalent Grade
STANDARD |
WERKSTOFF NR. |
UNS |
Inconel X-750 |
2.4669 |
N07750 |
Inconel 750 Sheets, Plates, and Coils Chemical Composition
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
Inconel X750 |
0.08 max |
1 max |
0.50 max |
0.01 max |
0.50 max |
5 - 9 |
70 min |
14 - 17 |
Inconel 750 Sheets, Plates, and Coils Mechanical Composition
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
8.28g/cm³ |
1430°C (2600°F) |
Psi – 181000, MPa – 1250 |
Psi – 123000, MPa – 850 |
26 % |
Inconel 750 Pipes & Tubes Manufacturer & Exporter in India
AstroMet Steel & Eng is a leading Inconel 750 Pipes Manufacturer and Exporter in India. Inconel 750 Pipes various process control equipment in Gas and Oil. The popular Pipes are also known as Nickel Alloy X-750 and are the best Nickel Chromium Alloy that is precipitation hardened. The widespread use of these Pipes is due to their efficient functioning and great build quality. The Inconel 750 Pipes are available majorly in seamless and welded types. All conditions result in austenitic Inconel 750 Tubes. The majority of Seamless and Welded variants of Inconel 750 are readily available. The drawing of a solid billet over a piercing rod, which results in a hollow shell, is how seamless pipes are made. Unlike other types of pipes, these pipes can resist a sufficient amount of pressure.
Rolling the plate and welding the seam results in Inconel X750 Welded Pipes. For ideal beginning temperatures of 1950/2000°F, the furnace temperature should be 2100°F (1149°C). Combining some cold work with heat treatment can increase strength for service below 1100°F (593°C), as the effects are additive
Inconel 750 Pipes/Tubes Specification
Size: |
15 NB to 150 NB IN |
Type: |
Seamless / ERW / Welded / Fabricated / Hollow / LSAW Pipes |
wall thickness |
035" –.095′, (special wall thicknesses available)
|
Schedule |
SCH5, SCH10, SCH40, STD, SCH80, SCH160
|
Finish |
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
|
Form |
Round, Square, Rectangular, Hydraulic, Straight or ‘U’ bent Tubes Etc
|
Inconel 750 Pipes/Tubes Equivalent Grade
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Inconel X-750 |
2.4669 |
N07750 |
- |
- |
- |
- |
- |
Inconel 750 Pipes/Tubes Chemical Composition
Grade |
Ni |
C |
Mn |
Cu |
S |
Si |
Cr |
Fe |
CO |
Al |
Ti |
S |
Nb |
750 |
70 |
0.08 |
1 |
0.5 |
0.01 |
0.5 |
17 |
9 |
1 |
1 |
2.75 |
0.01 |
1.2 |
Inconel 750 Pipes/Tubes Mechanical Composition
Grade |
X-750 |
Density |
8.28 g/cm3 |
Tensile Strength (MPa) min |
1267 |
Yield Strength 0.2% Proof (MPa) min |
868 |
Elongation (% in 50mm) min |
25 |
Hardness (Brinell) |
≤400 |
Inconel 750 Round Bars/rods Manufacturer & Exporter in India
Astromet Steel and Eng is a leading Inconel 750 round bars/rods Manufacturer and Stockholder in India. Inconel 750 Round Bars and Rods display outstanding resistance to chemical corrosion and oxidation, as well as good stress-rupture efficacy and low creep rates. After receiving the proper heat treatment, Inconel 750 Hex Bars exhibit great stress-rupture efficacy and low rates under high stresses, making them extremely resistant to chemical corrosion and oxidation. Our Inconel X-750 Bars are offered to our esteemed clients in a variety of diameters, wall thicknesses, and sizes in custom configurations, all at very reasonable prices.
Inconel 750 Round Bar Specification
Specification |
EN, DIN, JIS, ASTM, BS, ASME, AISI
|
Standard Specification |
ASTM B637 / ASME SB637
|
Size |
5 mm To 500 mm
|
Diameter |
0.1 mm to 100 mm
|
Length |
100 mm To 3000 mm Long & Above
|
Form |
Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc
|
Finish |
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
|
Inconel 750 Round Bar Equivalent Grade
STANDARD |
WERKSTOFF NR. |
JIS |
JIS |
Inconel X-750 |
2.4669 |
N07750 |
NCF X-750 |
Inconel 750 Round Bar Chemical Composition
Alloy |
% |
Ni |
Cr |
Fe |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
Inconel 750
|
Min. |
|
14 |
5 |
0.7 |
|
|
|
|
|
|
0.4 |
2.25 |
Max. |
70 |
17 |
9 |
1.2 |
1 |
0.08 |
1 |
0.5 |
0.01 |
0.5 |
1 |
2.75 |
Inconel 750 Round Bar Mechanical Composition
Alloy |
Tensile strength Rm N/mm2 |
Yield strength RP0.2N/mm2 |
Elongation A5 % |
Brinell hardness HB |
Solution treatment |
1267 |
868 |
25 |
≤400 |
Applications & Uses of Inconel 750 Products
- Sugar Industry.
- Power Industry.
- ShipBuilding Industry.
- Mechanical and Plant engineering.
- in Food, Beverage, and Dairy.
- Oil and Gas Plant.
- Instrumentation.
We are Supplying Inconel 750 in below mentioned cities in India
AstroMet Steel & Eng has been established as a leading Inconel 750 products Manufacturer, Supplier, and Stockist in India. Due to its product reliability and performance. We supply and export three containers of Inconel 750 products to Indian ports each month to diverse customers.
Cities We Supply Inconel 750 Products |
Bengaluru |
Mumbai |
Chennai |
Hyderabad |
Kolkata |
Pune |
New Delhi |
Ahmedabad |
Jaipur |
Surat |
Salem |
Gandhinagar |
Bhiwandi |
Tiruppur |
Sivakasi |
Jamnagar |
Thiruvananthapuram |
Rajahmundry |
Bhubaneswar |
Vijaywada |
Firozabad |
Agra |
Rajkot |
Bharuch |
Panna |
Raipur |
Cochin |
Ludhiana |
Panipat |
Durgapur |
Peenya |
Pimpri-Chinchwad |
Channapatna |
Kharagpur |
Nashik |
Indore |
Varanasi |
Haldia |
Rourkela |
Navi Mumbai |
Moradabad |
Noida |
Exporters of Inconel 750
AstroMet Steel & Eng exports Inconel 750 products to the United Arab Emirates, Europe, Africa, Asia, and other continents. We ship Inconel 750 products to various nations every month, and with our growing clientele, we now ship two containers of Inconel 750 Products to new places and ports.
Countries We Export Inconel 750 Products |
Saudi Arabia |
Qatar |
Canada |
Bangladesh |
Oman |
UAE |
Venezuela |
Turkey |
Kuwait |
Africa |
United Kingdom |
Singapore |
Netherlands |
China |
Malaysia |
Sri Lanka |
Iran |
Nigeria |
United States |
Australia |