Inconel 825 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer & Exporter in India - AstroMet Steel & Eng.
AstroMet Steel & Eng is a leading Inconel 825 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer in India. We are a experienced Manufacturer of Inconel 825 Sheets with the most competitive prices and fast delivery facilities everywhere in India. Inconel 825 Material is an often used in the Aerospace Industry. It is easily machined in particular tempers and is one of the strongest available aluminium alloys, having high hardness. However, it is not easy to weld due to cracking.
Inconel 825 Sheets, Plates, and Coils Manufacturer & Exporter in India
Astromet Steel and Eng is a leading Inconel 825 sheets, plates, and coils Manufacturer and Exporter in India. Nickel, Iron, and Chromium Alloy Inconel 825 also contain Molybdenum, Copper, and Titanium. It is an Alloy that offers excellent corrosion resistance in situations that are both mildly oxidizing and moderately reducing. Alloy 825 is comparable to Alloy 800, however, it provides better protection against water corrosion. Nickel Chromium Alloy Plates known as Inconel sheets and plates are primarily utilised for their outstanding fabricability and high strength. These plates are formed cold using the usual procedure. The plates are typically annealed at 1700–1900 degrees Fahrenheit.
Inconel 825 Sheets and Plates Specification
| Specification: | ASTM B423, ASTM B163, ASTM B704, ASTM B705 /751, ASME SB423, ASME SB163, ASME SB704, ASME SB 705/751, UNS N08825/ Werkstoff Nr. 2.4858. |
| Form: | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish: | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO (8), SATIN (Met with Plastic Coated) |
| Length: | Single Random, Double Random & Cut Length. |
| End: | Plain End, Beveled End, Treaded. |
Inconel 825 Sheets, Plates, and Coils Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Inconel 825 Sheets, Plates, and Coils Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Inconel 825 Sheets, Plates, and Coils Mechanical Composition
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Inconel 825 Pipes & Tubes Manufacturer & Exporter in India
AstroMet Steel & Eng. is one of the leading Inconel 825 Pipes & Tubes Exporters and Suppliers in India. We also supply high-quality Inconel 825 Pipes & Tubes in different grades and alloys. We are well known as an importer of all ferrous and nonferrous products. Inconel 825 is one of the most effective alloy choices for severe environments. Inconel 825 Welded Pipe resists getting sensitized by grain boundary precipitates and in turn, is resistant to intergranular corrosion. The outstanding resistance to corrosives in reducing environments has been attributed to the presence of Copper in the Alloy 825 Pipe.
Inconel 825 Pipes/Tubes Specification
| Specification: | ASME, ASTM, AISI, AMS, JIS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| Form: | ‘U’ bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
| Finish: | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Length: | Single Random, Double Random & Cut Length. |
| End: | Plain End, Beveled End, Treaded. |
Inconel 825 Pipes/Tubes Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Inconel 825 Pipes/Tubes Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Inconel 825 Pipes/Tubes Mechanical Composition
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Inconel 825 Round Bars/rods Manufacturer & Exporter in India
AstroMet Steel & Eng. is one of the leading Inconel 825 Round Bar Exporters and Suppliers in India. We are also referred to as UNS N08825/W.Nr. 2.4858, like the Inconel family is a Nickel-based Alloy. Apart from its primary Nickel, Iron, and Chromium base, the Alloy UNS N08825 Spring Steel Bar is Manufactured with additions of elements like molybdenum, copper, and titanium. The Chromium content in Alloy 825 Inconel Round Rod confers resistance to a variety of oxidizing chemicals or salts and compounds such as nitric acid, nitrates, and oxidizing salt. The addition of titanium in Incoloy 825 Din 2.4858 Cold Drawn Bar serves the alloy along with appropriate heat treatment.
Inconel 825 Round Bar Specification
| Specification: | ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS |
| Form: | Rod, Round, Channel bars, T-bars, Flat bars, Precision Ground bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round bars, Ingot, Billet, I/H bars, Forging, etc. |
| Finish: | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Length: | Single Random, Double Random & Cut Length. |
| End: | Plain End, Beveled End, Treaded. |
Inconel 825 Round Bar Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Inconel 825 Round Bar Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Inconel 825 Round Bar Mechanical Composition
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Applications & Uses of Inconel 825 Products
- Sugar Industry.
- Power Industry.
- ShipBuilding Industry.
- Mechanical and Plant engineering.
- in Food, Beverage, and Dairy.
- Oil and Gas Plant.
- Instrumentation.
We are Supplying Inconel 825 in below mentioned cities in India
AstroMet Steel & Eng has been established as a leading Inconel 825 products Manufacturer, Supplier, and Stockist in India. Due to its product reliability and performance. We supply and export three containers of Inconel 825 products to Indian ports each month to diverse customers.
| Cities We Supply Inconel 825 Products | |||||
|---|---|---|---|---|---|
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Agra | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Indore |
| Varanasi | Haldia | Rourkela | Navi Mumbai | Moradabad | Noida |
Exporters of Inconel 825
AstroMet Steel & Eng exports Inconel 825 products to the United Arab Emirates, Europe, Africa, Asia, and other continents. We ship Inconel 825 products to various nations every month, and with our growing clientele, we now ship two containers of Inconel 825 Products to new places and ports.
| Countries We Export Inconel 825 Products | |||
|---|---|---|---|
| Saudi Arabia | Qatar | Canada | Bangladesh |
| Oman | UAE | Venezuela | Turkey |
| Kuwait | Africa | United Kingdom | Singapore |
| Netherlands | China | Malaysia | Sri Lanka |
| Iran | Nigeria | United States | Australia |