Nickel 200/201 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer & Exporter in India - AstroMet Steel & Eng.
AstroMet Steel & Eng is a leading Nickel 200/201 Sheet, Plate, Coil, Pipe, and Round Bar Manufacturer in India. We are a experienced Manufacturer of Nickel 200/201 Sheets with the most competitive prices and fast delivery facilities everywhere in India. Nickel 200/201 Material is an often used in the Aerospace Industry. It is easily machined in particular tempers and is one of the strongest available aluminium Alloys, having high hardness. However, it is not easy to weld due to cracking.
Nickel 200/201 Sheets, Plates, and Coils Manufacturer & Exporter in India
AstroMet Steel & Eng is a leading Nickel 200/201 Sheets /Plates Manufacturer, Supplier, and Exporter in India. Nickel 200/201 Sheets and Plates offer remarkable mechanical properties as well as outstanding resistance to a wide range of corrosive environments. Nickel 201, the lower carbon chemistry, is preferred for applications at temperatures higher than 600°F (315°C). Nickel 200 and 201 plates have exceptional corrosion resistance to caustic soda and other alkalis. Multiple complex industrial applications can make use of Nickel 200 Coils.
Nickel 200/201 Sheets and Plates Specification
| Specification | Sheets: ASTM B162 / ASME SB162, AMS 5553 |
| Dimensions | Sheets: ASTM, ASME, and API |
| Finish: | Sheets: Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc. |
| Form | Sheets: Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| End | Plain End, Beveled End, Treaded |
Nickel 200/201 Sheets, Plates, and Coils Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Nickel 200/201 Sheets, Plates, and Coils Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200/201 Sheets, Plates, and Coils Mechanical Composition
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Nickel 200/201 Pipes & Tubes Manufacturer & Exporter in India
AstroMet Steel & Eng. is a Well-established field of Nickel 200/201 Pipes & Tubes Supplying and Manufacturing in India. In contrast to other Pipes, these have low electrical resistance and are ferromagnetic. As low-carbon alternatives to this Alloy, the Pipes are not as hard as some of their rivals. The Pipes have a low stiffness after annealing. They also toughen at a very slow rate. High levels of creep resistance are provided by these Pipes. These Pipes are very ductile and robust. At high temperatures, these Pipes have better creep qualities. These Pipes have outstanding oxidation resistance.
Nickel 200/201 Pipes/Tubes Specification
| Specification | Pipes/ Tubes: ASTM B161, B163 / ASME SB161, SB163 |
| Dimensions | Pipes/ Tubes: ASTM, ASME and API |
| Finish: | Pipes/ Tubes: Polished, BA (Bright & Annealed), MF, AP (Annealed & Pickled) |
| Form | Pipes/ Tubes: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes |
| Length | Pipes/ Tubes: Single Random, Double Random & Required Length |
| End | Plain End, Beveled End, Treaded |
Nickel 200/201 Pipes/Tubes Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Nickel 200/201 Pipes/Tubes Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200/201 Pipes/Tubes Mechanical Composition
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Nickel 200/201 Round Bars/rods Manufacturer & Exporter in India
AstroMet Steel & Eng is a leading Nickel 200/201 Round Bars/Rods Manufacturer and Exporter in India. Customers may easily find Nickel 200/201 Round Bars in a range of sizes and shapes. While Nickel 200 Round Bars have high electrical conductivity, Nickel 201 Round Bars have good corrosion resistance to both natural and distilled fluids. Both Nickel 200 and Nickel 201 rods offer corrosion resistance in oxidizing environments, as long as the oxidizing environment allows for the production of an impermeable oxide film.
Nickel 200/201 Round Bar Specification
| Specification | Round Bars: ASTM B160 / ASME SB160 |
| Dimensions | Round Bars: ASTM, ASME and API |
| Finish: | Round Bars: Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form | Round Bars: Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc., |
| End | Plain End, Beveled End, Treaded |
Nickel 200/201 Round Bar Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Nickel 200/201 Round Bar Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200/201 Round Bar Mechanical Composition
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Applications & Uses of Nickel 200/201 Products
- Sugar Industry.
- Power Industry.
- ShipBuilding Industry.
- Mechanical and Plant engineering.
- in Food, Beverage, and Dairy.
- Oil and Gas Plant.
- Instrumentation.
We are Supplying Nickel 200/201 in below mentioned cities in India
AstroMet Steel & Eng has been established as a leading Nickel 200/201 products Manufacturer, Supplier, and Stockist in India. Due to its product reliability and performance. We supply and export three containers of Nickel 200/201 products to Indian ports each month to diverse customers.
| Cities We Supply Nickel 200/201 Products | |||||
|---|---|---|---|---|---|
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Agra | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Indore |
| Varanasi | Haldia | Rourkela | Navi Mumbai | Moradabad | Noida |
Exporters of Nickel 200/201
AstroMet Steel & Eng exports Nickel 200/201 products to the United Arab Emirates, Europe, Africa, Asia, and other continents. We ship Nickel 200/201 products to various nations every month, and with our growing clientele, we now ship two containers of Nickel 200/201 Products to new places and ports.
| Countries We Export Nickel 200/201 Products | |||
|---|---|---|---|
| Saudi Arabia | Qatar | Canada | Bangladesh |
| Oman | UAE | Venezuela | Turkey |
| Kuwait | Africa | United Kingdom | Singapore |
| Netherlands | China | Malaysia | Sri Lanka |
| Iran | Nigeria | United States | Australia |